RadioShack 16-913 Mode D'Emploi
18
A
d
va
n
ce
d
S
et
ti
n
g
s
Advanced Settings
Picture Settings
Use Preset Picture Settings
Change picture settings based on preselected criteria.
1.
Press MENU on the TV or remote control. The main
menu displays.
2.
Press or on the TV or remote control to select
Picture, then press OK or .
3.
Press or to highlight Picture Mode, press , and select Standard, Vivid, Bright,
or User.
n
Note: The Standard setting is recommended for most viewing environments.
Depending on the ambient light level in the room, you may find one of the other options
is better for viewing.
4. Press MENU to accept changes and go back to the menu.
Customize Picture Settings
1.
Follow Steps 1 through 4 under “Use Preset Picture Settings.” Set Picture Mode to
User.
2.
Press or to select Brightness, Contrast, Color, Sharpness, or Tint, then press
.
3.
Press or to adjust the picture settings.
4.
Press MENU to go back to the previous menu.
Advanced Video Settings
1.
Follow Steps 1 through 4 under “Use Preset
Picture Settings.” Set Picture Mode to User.
2.
Press or to select Advanced Video. Press OK
or to go to the next screen.
3.
Press or to select Aspect Ratio, Color
Temperature, Noise Reduction, 3D Y/C, Gradient
Enable, or Blue Screen, then press or to
adjust settings (explained below).
4.
Press MENU to accept changes and go back to the previous menu.
Aspect Ratio
Normal – Recommended for viewing content broadcast in 4:3 widescreen. Adds black
bars on either side of the image to avoid image distortion.
Wide – Stretch some 4:3 content. Reduces or eliminates black bars, but may distort
image.
Zoom – Stretch an image vertically and horizontally to fill the screen while viewing 4:3
widescreen content. No distortion, but parts of the image may be cut off.
Cinema – Fills the entire screen and eliminates black bars. May cut off parts of images,
but will not distort or stretch the picture.