Zanussi ZEL6640FBA Manuel D’Utilisation

• you spill something or put something on the

control panel for more than 10 seconds (a

pan, a cloth, etc.). An acoustic signal sounds

and the hob deactivates. Remove the object

or clean the control panel.

• the hob gets too hot (e.g. when a saucepan

boils dry). Let the cooking zone cool down

before you use the hob again.

• you use incorrect cookware. The symbol 

comes on and the cooking zone deactivates

automatically after 2 minutes.

• you do not deactivate a cooking zone or

change the heat setting. After some time 

comes on and the hob deactivates.

, 1 - 2

6 hours

3 - 4

5 hours

5

4 hours

6 - 9

1.5 hour

Touch   to increase the heat setting. Touch

 to decrease the heat setting. Touch   and
 at the same time to deactivate the cooking

zone.

If you activate this function you can get a

necessary heat setting in a shorter time. The

function sets the highest heat setting for some

time and then decreases to the correct heat

setting.

To activate the function the cooking

zone must be cold.

To activate the function for a cooking
zone: touch   (  comes on). Immediately
touch   (  comes on). Immediately touch 

until the correct heat setting comes on. After 3
seconds   comes on.

To deactivate the function: touch  .

To activate the function for a cooking
zone if there is no   on the display: touch

 then chose the highest heat setting 9 and

touch   again. Immediately touch   to set a

desired heat setting.
To deactivate the function: change the heat

setting.

This function makes more power available to the

induction cooking zones. The function can be

activated for the induction cooking zone only for

a limited period of time. After this time the

induction cooking zone automatically sets back

to the highest heat setting.

Refer to “Technical information”

chapter.

To activate the function for a cooking
zone: touch  .   comes on.

To deactivate the function: touch   or  .

Count Down Timer

You can use this function to set how long the

cooking zone should operate for a single

cooking session.
First set the heat setting for the cooking zone

then set the function.

To set the cooking zone: touch   again and

again until the indicator of a necessary cooking

zone comes on.
To activate the function or change the
time: touch   or   of the timer to set the

time (00 - 99 minutes). When the indicator of

the cooking zone starts to flash slowly the time

counts down.
To see the remaining time: set the cooking
zone with  . The indicator of the cooking zone

starts to flash quickly. The display shows the

remaining time.
To deactivate the function: set the cooking
zone with   and touch  . The remaining time

counts back to 00. The indicator of the cooking

zone goes out.