Bosch TDS-2241 Sensixx B 22 L Manuel D’Utilisation

17

BOSCH

* Model dependent

appliance has been designed to use normal 

tap water.

•  The iron is not designed to rest on its heal. 

Please always position it horizontally on the 

iron pad (2).

•  The iron pad can be placed into the specially 

designed recess on the appliance or 

somewhere suitable alongside the ironing 

area.

 

•  During it first use the iron may produce certain 

vapours and odours, along with white particles 

on the soleplate, this is normal and it will stop 

after a few minutes

•  While the steam release button is pressed, the 

water tank may produce a pumping sound, this 

is normal, indicating that water is being 

pumped to the steam tank.

1. Check the ironing instruction label on the 

garment to determine the correct ironing 

temperature.

2. Turn the temperature selector (16) to the 

required setting:

●

Synthetics

●●

Silk – Wool

●●●

Cotton – Linen

3. The indicator lamp (19) will remain lit while the 

iron is heating and go out as soon as the iron 

has reached the selected temperature.

•  Sort your garments out based on their cleaning 

symbol labels, always starting with clothes that 

have to be ironed at the lowest temperatures.

•  If you are not sure what the garment is made 

of then begin ironing at a low temperature and 

decide on the correct temperature by ironing a 

small section not usually seen when worn



 

1. Turn the temperature selector (16) to the 

required setting.

2. 

  Set the amount of steam to suit your needs, 

using the variable steam control (11*).



 

1. 

Model dependent: Release the iron from its 

lock system (14*) by pulling the lever located at 

the heel of the iron backwards.

2. Remove any label or protective covering from 

the soleplate.

3. Place the appliance horizontally on a solid, 

stable surface. You may remove the iron pad 

from the appliance and place the iron on it on 

another solid, stable, horizontal surface.

4. Fill the water tank, making sure not to pass the 

level mark.

5. Unwind the mains cable (6) fully and plug it 

into an earthed socket.

6. Set the main power switch (13) to the on 

position.

7. The “Steam ready” indicator lamp (9) will light 

up after several minutes, indicating that the 

appliance is ready to use. 

  The steam generator will take more time to 

reach “Steam ready” state only upon the initial 

heating up, or after performing the de-scaling 

operation (Calc’n’Clean).

  When water is already present in the steam 

generator during regular use, heat up time to 

reach the operating temperature will be faster.

8. This appliance has a built-in water level 

sensor. The “refill water tank” indicator (12*) 

will light when the water tank is empty.

 

  If the “steam ready” lamp (9) lights and steam 

is not released when pressing the steam 

release button (17-18*), refill the water tank.

•  Normal tap water can be used. 

  To prolong the optimum steam function, mix 

tap water with distilled water 1:1. If the tap 

water in your district is very hard, mix tap water 

with distilled water 1:2. 

  You can inquire about the water hardness with 

your local water supplier.

•  The water tank can be filled at any time while 

using the appliance.

•  To avoid damage and/or contamination of the 

water tank and the boiler, do not put perfume, 

vinegar, starch, descaling agents, additives or 

any other type of chemical product into the water 

tank.

 

•  Do not use condensation water from tumble 

dryers, air conditioning systems or similar. This