Bosch TDS-2241 Sensixx B 22 L Manuel D’Utilisation

18

BOSCH

* Model dependent

  For normal use, please choose one of the 

following recommended settings:

●

●●

●●●

3. Press the steam (17-18*) release button to 

release steam.

When ironing on a lower temperature setting “●”.

•  If the appliance has variable steam control 

(11*), set the variable steam control to its 

lowest position  . 

•  If the appliance does not have variable steam 

control, press the steam release button only for 

a few seconds at a time when ironing at lower 

temperatures.

In both cases, if you find that water is dripping out 

of the soleplate, set the temperature selector (16) 

to a higher position 

 •  At the beginning of each use, it is possible that 

drops of water will be dispensed alongside 

steam. 

  Therefore, it is advisable to try the iron on the 

ironing board or a piece of cloth to start with.

Tip : for better ironing results, iron the last 

strokes without steam to dry the garment.

This appliance has a special function for tackling 

difficult creases.

The “PulseSteam” function helps soften stubborn 

garments like jeans or linen faster.

When the steam release button is activated, the 

steam generator will release three powerful shots 

of steam so that the steam reaches even deeper 

into the fabrics.

1. Set the temperature selector (16) on “• • •”

2. Briefly press the steam shot button (18*) on the 

top of the handle.

  Press the steam release button (17) on the 

bottom of the handle two times in quick 

succession (double-click).

•  It is possible to stop the shots of steam by 

quickly pressing the steam button again.

•  Some water drops may appear when you use 

the “PulseSteam” function for the first time. 

  The water drops will disappear after you have 

used the function for some time.

This system has intelligent steam control, which, 

after releasing the steam release button (17), 

provides a small amount of additional steam. 

The additional steam can always be stopped by 

briefly pressing the steam release button once 

again.

Begin ironing but without pressing the steam 

release button.



 

1.Set the temperature control knob to at least the 

“●●●” position.

2. Hold the iron in an upright position 15 cm away 

from the garment being steamed.

3. You can steam iron curtains and hanging 

garments (jackets, suits, coats...) by placing 

the iron in a vertical position and pressing the 

steam release button (17-18*).

If the “Energy saving” button (8*) is switched on, 

you can save up to 25% of the energy and 40% of 

the water consumption (*), and still achieve good 

results when ironing most of your garments.

It is advisable to use the normal energy setting 

only for thick and very wrinkled fabrics.

(*) In comparison to the maximum setting.