Alpine tme-m860 Manuel D’Utilisation
5
-EN
01GB05TMEM860.fm
ALPINE TME-M860 68-04123Z81-B (EN)
Switching the Source
Each time you press SOURCE, SOURCE is switched as
follows.
follows.
NAV.
AUX-1
AUX-2
S-VIDEO
NAV.
NAV.:
Displays the navigation screen. (When connected to the Alpine’s
Navigation system)
Displays the navigation screen. (When connected to the Alpine’s
Navigation system)
AUX-1 / AUX-2 / S-VIDEO:
Displays the screen of the DVD player etc. that is connected to
the AUX-1/AUX-2/S-VIDEO INPUT jack.
Displays the screen of the DVD player etc. that is connected to
the AUX-1/AUX-2/S-VIDEO INPUT jack.
1
Touch any point on the display to display the
operation screen for each source.
operation screen for each source.
2
Touch [SOURCE].
The source selection screen is displayed.
3
Touch the desired source.
The main source screen is displayed.
Display example for source selection screen
General Setup Operation
1
Press and hold SOURCE for at least 2 seconds.
The SETUP selection screen is displayed.
2
Touch [GENERAL SETUP].
The GENERAL SETUP screen appears.
3
Change the setting by touching [ ] or [ ] of the
desired setting item.
desired setting item.
Setting items:
DISPLAY MODE / DIMMER / AUX OUT / SOUND OUT / BEEP
PULSE TOUCH / AUX IN1·2 LEVEL / AUX IN 1·2MODE /
S-VIDEO MODE / CAMERA IN / NAV. MODE / DIMMER LEVEL
HIGH / DIMMER LEVEL LOW /GUIDE CONTROL / SCREEN
ALIGNMENT / INSTALL POSITION
PULSE TOUCH / AUX IN1·2 LEVEL / AUX IN 1·2MODE /
S-VIDEO MODE / CAMERA IN / NAV. MODE / DIMMER LEVEL
HIGH / DIMMER LEVEL LOW /GUIDE CONTROL / SCREEN
ALIGNMENT / INSTALL POSITION
4
Touch [RETURN] to return to the normal screen.
• Immediately after changing the settings of General Mode (While the
system is writing data automatically) do not turn the ignition key
(engine key) to OFF.
Otherwise, the settings may not be changed.
(engine key) to OFF.
Otherwise, the settings may not be changed.
Hardkey Operation
Touch Button Operation
Displays source modes that can be selected
(The kind of source modes that are displayed
varies depending on connection and setting)
(The kind of source modes that are displayed
varies depending on connection and setting)
Setup
GENERAL Setup
The Parking Brake must be engaged to access the setup mode
screen. Attempting to access this screen while driving will display
the warning-CAN’T OPERATE WHILE DRIVING.
screen. Attempting to access this screen while driving will display
the warning-CAN’T OPERATE WHILE DRIVING.
The following steps 1 to 4 are common operations to each
“Setting item” of GENERAL Setup. Refer to each section for
details.
“Setting item” of GENERAL Setup. Refer to each section for
details.
Touch [
] or [
] to scroll screen-by-screen.
01GB00TMEM860.book Page 5 Wednesday, February 22, 2006 11:30 AM