Alpine tme-m860 Manuel D’Utilisation
7
-EN
01GB05TMEM860.fm
ALPINE TME-M860 68-04123Z81-B (EN)
You can turn the touch panel’s vibration ON or OFF during operation.
Setting item: PULSE TOUCH
Setting contents: OFF / ON
Setting contents: OFF / ON
Setting item: AUX IN 1 LEVEL / AUX IN 2 LEVEL
Setting contents: HIGH / LOW
Setting contents: HIGH / LOW
• This setting cannot be made when AUX IN 1 MODE/AUX IN 2
MODE is set to OFF in “External Input Name Setting”.
Select the name from the following list, to be used for the product using
the external input mode. This will apply to the touch switch name at
source selection time and the source name during playback change.
the external input mode. This will apply to the touch switch name at
source selection time and the source name during playback change.
Setting item: AUX IN 1 MODE / AUX IN 2 MODE / S-VIDEO MODE
Setting contents:
Setting contents:
• When you set to OFF, you cannot do operations concerning AUX or
S-VIDEO from this unit.
When the rear camera is connected, rear pictures are output on the
screen.
screen.
Setting item: CAMERA IN
Setting contents: OFF / ON
Setting contents: OFF / ON
• By shifting to reverse (R), the rear pictures are output.
This function is effective when the reverse wire is properly connected.
When you connect an optional navigation equipment, set it to NAV.
Setting item: NAV. MODE
Setting contents: OFF / NAV. / EXT.
Setting contents: OFF / NAV. / EXT.
You can adjust the brightness of the backlight (HIGH and LOW). This
function could be used, for instance, to change the screen brightness
while travelling at night.
function could be used, for instance, to change the screen brightness
while travelling at night.
Setting a maximum brightness
Setting item: DIMMER LEVEL HIGH
Setting contents: 16~31
Setting contents: 16~31
You can adjust the level between MIN (16) and MAX (31).
When it reaches the minimum or maximum point, the display
shows “MIN” or “MAX” respectively.
When it reaches the minimum or maximum point, the display
shows “MIN” or “MAX” respectively.
Setting a minimum brightness
Setting item: DIMMER LEVEL LOW
Setting contents: 0~15
Setting contents: 0~15
You can adjust the level between MIN (0) and MAX (15).
When it reaches the minimum or maximum point, the display
shows “MIN” or “MAX” respectively.
When it reaches the minimum or maximum point, the display
shows “MIN” or “MAX” respectively.
It is audio interruption setting for the navigation system.
Setting item: GUIDE CONTROL
Setting contents: STANDARD / EUROPE
Setting contents: STANDARD / EUROPE
The setting can be made only when NAV. or EXT. is set in
“Setting the Navigation Mode”.
“Setting the Navigation Mode”.
Adjustment becomes necessary when the display position on the LCD
and the touch position on the touch panel do not match.
and the touch position on the touch panel do not match.
Setting item: SCREEN ALIGNMENT
Setting contents:
Setting contents:
(RESET) /
(SETUP)
1 Touch [
] of SCREEN ALIGNMENT.
The adjustment screen appears.
2 Accurately touch the
mark provided in the lower left
corner of the screen.
The screen changes to the adjustment screen.
The screen changes to the adjustment screen.
3 Accurately touch the
mark provided in the upper right
corner of the screen.
This completes adjustment, and returns to the GENERAL
setup mode screen.
This completes adjustment, and returns to the GENERAL
setup mode screen.
• If you have touched a location other than the
mark, touch the
mark to restore the adjustment screen to the initial setting.
• If you touch [RETURN] on the adjustment screen, no adjustment is
done and the GENERAL setup screen is restored.
Turning the Touch Panel Vibration ON or
OFF
OFF
OFF:
Turns off vibration during operation.
ON:
Turns on vibration during operation.
Adjusting the External Input Audio Level
HIGH: Increases the external input audio level
LOW:
Decreases the external input audio level
External Input Name Setting
AUX IN 1: OFF / TV / DVB-T / EXT. DVD / GAME / AUX 1
AUX IN 2: OFF / TV / DVB-T / EXT. DVD / GAME / AUX 2 /
LINK / DVD HU
S-VIDEO: OFF / S-VIDEO / DVD HU
Setting of the Rear Camera
OFF: The CAMERA source is not displayed on the SOURCE
selection screen.
ON:
Even if the shift lever is not set to reverse (R), the rear
pictures are output by selecting the CAMERA source.
pictures are output by selecting the CAMERA source.
Setting the Navigation Mode
OFF: Navigation source is not displayed. The settings related
to the navigation can not be changed from this unit.
NAV.: Navigation source is displayed.
EXT.: The source name is displayed as EXT..
Adjusting the Level of Backlight
Setting the GUIDE CONTROL
For European customers:
Be sure to set to “EUROPE”.
For customers in other countries: Be sure to set to “STANDARD”.
Adjusting the Touch Panel
01GB00TMEM860.book Page 7 Wednesday, February 22, 2006 11:30 AM