TP-LINK TL-WR740N Manuel D’Utilisation

 

- 46 - 

You cannot change any of the values on this page. To update this page and to show the current 

connected wireless stations, click on the Refresh button.   

If the numbers of connected wireless stations go beyond one page, click the Next button to go to 

the next page and click the Previous button to return the previous page. 

)

This page will be refreshed automatically every 5 seconds. 

 

Figure 4-25    The DHCP menu 

There are three submenus under the DHCP menu (shown in Figure 4-25), DHCP Settings, 

DHCP Clients List and  Address Reservation. Click any of them, and you will be able to 

configure the corresponding function. 

Choose menu “DHCP  → DHCP Settings”, you can configure the DHCP Server on the page as 

shown in Figure 4-26.The Router is set up by default as a DHCP (Dynamic Host Configuration 

Protocol) server, which provides the TCP/IP configuration for all the PC(s) that are connected to 

the Router on the LAN.   

 

Figure 4-26 DHCP Settings 

¾

 

DHCP Server - Enable or Disable the DHCP server. If you disable the Server, you must