RAD Data comm ASM-60 Manuel D’Utilisation

Page de 90
Appendix B  IR-ETH/QH Interface Module 
ASM-60 Installation and Operation Manual 
B-2 
Installation and Operation 
 
Table B-1.  RJ-45 Connector Pinout 
Pin Signal 
Function 
RD (+) 
Receive Data (positive) 
RD (-) 
Receive Data (negative) 
TD (+) 
Transmit Data (positive) 
TD (-) 
Transmit Data (negative) 
B.3 Technical Specifications 
Bridge 
LAN Table 
1,000 MAC addresses 
 
Aging 
5 minute, automatic 
 
Filtering and 
Forwarding Rate 
150,000 packets per second 
 
Buffer Size 
170 frames 
 
Delay 
1 frame 
LAN 
Standard 
IEEE 802.3/Ethernet V.2, IEEE 802.1/Q  
 
Data Rate 
•  10BaseT: 10 Mbps (20 Mbps in full duplex) 
•  100BaseT: 100 Mbps (200 Mbps in full duplex) 
 
Transmission Line 
4-wire, Category 5 UTP, 19 AWG to 26 AWG 
 
Line Code 
•  10BaseT: Manchester 
•  100BaseT: MLT3 
 
Connector 
RJ-45 
WAN 
Protocol  
Point-to-point 
 
Data Rate 
512 kbps to 45 Mbps 
B.4 Installation and Operation 
 shows location of the configuration DIP switch on the module’s board. 
S1
ON
8 7 6 5 4 3 2 1
 
Figure B-3.  DIP Switch Location