Fujifilm FinePix 50i Manuel D’Utilisation
21
W
indows
20
W
indows
indows
1. Exit FinePixViewer or VideoImpression.
2. Check that the CHARGE/ACCESS lamp (red) on the cradle is
not flashing.
3. Switch the camera off.
Check that the POWER lamp (green) is off.
4. Remove the camera from the cradle.
5. To prevent dust buildup on the socket, replace the
connection socket cover.
NOTE
PC Camera Connection
– Videoconferencing (Windows) and Capturing Video –
1. Remove the connection socket cover on the side of the
camera.
✽
When you remove the camera from the cradle to take pictures, replace the
connection socket cover on the camera to prevent dust buildup on the socket.
Take care not to lose the connection socket cover while the camera is in the
cradle.
connection socket cover on the camera to prevent dust buildup on the socket.
Take care not to lose the connection socket cover while the camera is in the
cradle.
2. Place the camera in the cradle and slide it onto the
connection terminal.
✽
Push the cradle connection terminal firmly into the camera socket.
3. With the lens cover open, slide the power switch to “
”
to switch the camera on.
red
Removing the Camera from the Cradle (PC Camera Connection)
If you are using Windows, PC Camera Driver installation (/ P.29)
begins the first time you connect the camera to your PC.
begins the first time you connect the camera to your PC.
●
2
●
1