Fujifilm FinePix 50i Manuel D’Utilisation
22
23
W
indows
indows
W
indows
7. The “Add New Hardware Wizard” dialog appears.
Click the [Next >] button.
If the dialog box does not appear, uninstall
(See P.63) and then re-install the Mass
Storage Driver. (See P.22.)
(See P.63) and then re-install the Mass
Storage Driver. (See P.22.)
8. Select “Search for the best driver for your device
(Recommended)” and click the [Next >] button.
9. Tick the “CD-ROM drive” checkbox and then click the [Next >]
button.
✽
If any checkboxes other than “CD-
ROM drive” are ticked, clear the
ticks so that “CD-ROM drive” is the
only checkbox ticked.
ROM drive” are ticked, clear the
ticks so that “CD-ROM drive” is the
only checkbox ticked.
✽
The dialog shown may differ slightly on some types of PC.
NOTE
Windows 98/98SE
Installing the Mass Storage Driver
Installing Mass Storage Driver allows you to transfer files recorded on the
camera to your PC.
camera to your PC.
The Windows CD-ROM may also be required in some cases. Have the CD-ROM ready
beforehand. If no Windows CD-ROM was supplied with your PC, consult the Owner’s
Manual for your PC or contact your PC’s manufacturer.
beforehand. If no Windows CD-ROM was supplied with your PC, consult the Owner’s
Manual for your PC or contact your PC’s manufacturer.
1. Switch on your PC and start up Windows.
2. Insert the enclosed CD-ROM into the CD-ROM drive.
If the installation screen for the applications provided on the
CD-ROM appears, click the [Exit] button to exit the screen.
CD-ROM appears, click the [Exit] button to exit the screen.
3. Load a SmartMedia containing images you have shot into the
camera.
4. Set up the cradle. (/ P.17)
5. Place the camera in the
cradle and switch the
camera on with the lens
cover closed. (/ P.18)
camera on with the lens
cover closed. (/ P.18)
6. A message indicating that
your PC has detected USB
Mass Storage appears in the
“New Hardware Found”
dialog box.
Mass Storage appears in the
“New Hardware Found”
dialog box.
NOTE
Continued over page...
If an older version of the USB Mass Storage Driver is already installed on
your PC, use the software on the enclosed CD-ROM to uninstall the old
version (/ P.63) and then install the latest version as described below.
The latest version of the USB Mass Storage Driver is backward-compatible
with earlier versions, so you can continue to use your existing USB devices
(cameras, interface sets, etc.) with the new driver.
your PC, use the software on the enclosed CD-ROM to uninstall the old
version (/ P.63) and then install the latest version as described below.
The latest version of the USB Mass Storage Driver is backward-compatible
with earlier versions, so you can continue to use your existing USB devices
(cameras, interface sets, etc.) with the new driver.
From this point onwards the procedure differs depending on
your operating system.
your operating system.
✽ Windows 98/98SE / P.23
✽ Windows Me / P.25
✽ Windows 2000 Professional / P.27