jetway v333ur1a Manuel D’Utilisation

 
 
 
                                                                                                                                                                                                                                                                                                                                                         

 
 
 

 

Typematic Rate Setting 
Keystrokes repeat at a rate determined by the keyboard controller. When enabled, the 
typematic rate and typematic delay can be selected.  The settings are: Enabled/Disabled.  

Typematic Rate (Chars/Sec) 
Sets the number of times a second to repeat a keystroke when you hold the key down.  The 
settings are: 6, 8, 10, 12, 15, 20, 24, and 30. 
Typematic Delay (Msec) 
Sets the delay time after the key is held down before is begins to repeat the keystroke.  The 
settings are 250, 500, 750, and 1000. 
Security Option 
This category allows you to limit access to the system and Setup, or just to Setup. 

The system will not boot and access to Setup will be denied if the 
correct password is not entered at the prompt. 

Setup (default)  The system will boot, but access to Setup will be denied if the correct 

password is not entered prompt. 

OS Select For DRAM > 64MB 
Allows OS2 to be used with >64MB or DRAM. Settings are Non-OS/2 (default) and 
OS2.  Set to OS/2 if using more than 64MB and running OS/2. 
 
 

The Advanced Chipset Features Setup option is used to change the values of the chipset 
registers.  These registers control most of the system options in the computer. 
 

↑↓→←