TP-LINK TL-WR740N Manuel D’Utilisation
![TP-LINK](https://files.manualsbrain.com/attachments/4d45e1da28d82d97a14cc52b904d065832fadc3e/common/fit/150/50/19c41f2620d27a16e36b513f2e907691223c5e6ec2f2f5e9ece0de10684a/brand_logo.png)
TL-WR740N/TL-WR741ND
150Mbps Wireless N Router
¾
Default Gateway - (Optional) Enter the gateway IP address provided by your ISP in
dotted-decimal notation.
¾
MTU Size - The normal MTU (Maximum Transmission Unit) value for most Ethernet networks
is 1500 Bytes. It is not recommended that you change the default MTU Size unless required
by your ISP.
¾
Primary/Secondary DNS - (Optional) Enter one or two DNS addresses in dotted-decimal
notation provided by your ISP.
3. If your ISP provides a PPPoE connection, select PPPoE/Russia PPPoE option. And you
should enter the following parameters (Figure 4-7):
Figure 4-7 WAN - PPPoE
¾
User Name/Password - Enter the User Name and Password provided by your ISP. These
fields are case-sensitive.
¾
Confirm Password - Re-enter the Password provided by your ISP to ensure the Password
you entered is correct.
¾
Secondary Connection - It’s available only for PPPoE Connection. If your ISP provides an
extra Connection type such as Dynamic/Static IP to connect to a local area network, then you
can check the radio button of Dynamic/Static IP to activate this secondary connection.
•
Disabled - The Secondary Connection is disabled by default, so there is PPPoE
connection only. This is recommended.
connection only. This is recommended.
27