TP-LINK TL-WR740N Manuel D’Utilisation

 

• 

Dynamic IP  -  You can check this radio button to use Dynamic IP as the secondary 
connection to connect to the local area network provided by ISP. 

• 

Static IP - You can check this radio button to use Static IP as the secondary connection 
to connect to the local area network provided by ISP. 

¾

 

Connect on Demand - In this mode, the Internet connection can be terminated automatically 

after a specified inactivity period (Max Idle Time) and be re-established when you attempt to 

access the Internet again.  If you want your Internet connection keeps active all the time, 

please enter “0” in the Max Idle Time field.

 

Otherwise, enter the number of minutes you want 

to have elapsed before your Internet access disconnects. 

¾

 

Connect Automatically - The connection can be re-established automatically when it was 

down. 

¾

 

Time-based Connecting - The connection will only be established in the period from the 

start time to the end time (both are in HH:MM format).   

)

Only when you have configured the system time on System Tools -> Time page, will the 

Time-based Connecting function can take effect. 

¾

 

Connect Manually - You can click the Connect/ Disconnect button to connect/disconnect 

immediately. This mode also supports the Max Idle Time function as Connect on Demand 

mode. The Internet connection can be disconnected automatically after a specified inactivity 

period and re-established when you attempt to access the Internet again.   

Caution: Sometimes the connection cannot be terminated although you specify a time to Max Idle 

Time, since some applications are visiting the Internet continually in the background. 

If you want to do some advanced configurations, please click the Advanced button, and the page 

shown in Figure 4-8 will then appear: 

28