Manualsbrain.com
  1. Manuels
  2. Marques
  3. Clarion
  4. CZ703E
  5. Manuel D’Utilisation

Clarion CZ703E Manuel D’Utilisation

Télécharger
Page de 20
English
10
CZ703E
Radio Data System Operations
Radio Data System
This unit has a built-in “Radio Data System” 
decoder  system  that  supports  broadcast 
stations transmitting “Radio Data System” data.
When using the “Radio Data System” function, 
always set the radio to FM mode.
AF function
The  AF  function  switches  to  a  different 
frequency  on  the  same  network  in  order  to 
maintain optimum reception.
*  The factory default setting is ON.
1.   Set to system setup by long pressing [
DISP] 
button.
2.   Press the [ 
 ] or [ 
 ] button to select 
“
AF
”.
3.   Rotate the [
VOLUME
] knob to select ON or 
off.
  • AF ON:
   “
AF
” indicator appears in the display and AF 
function turns on.
  • AF OFF:
   “
AF
” indicator disappears in the display and 
Af function turns off.
REG (Regional programme) function
When the REG function is ON, the optimum
regional station can be received. When this
function is OFF, if the regional station area
switches as you drive, a regional station for 
that region is received.
* The factory default setting is ON.
Notes:
•   This function is disabled when a national 
station such as BBC R2 is being received.
•   The REG function ON/OFF setting is valid 
when the AF function is ON.
1.   Set to system setup by long pressing [
DISP] 
button.
2.   Press the [ 
 ] or [ 
 ] button to select 
“
REG
”.
3.   Rotate the [
VOLUME
] knob to select ON or 
off.
Manually tuning a regional station 
in the same network
This function is valid when the AF function is 
ON and the REG function is OFF.
Manually tuning a regional station in 
the same network
This  function  is  valid  when  the  AF  function  is 
ON and the REG function is OFF.
Note:
This  function  can  be  used  when  a  regional 
broadcast of the same network is received.
TA (Traffic Announcement)
In the TA standby mode, when a traffic
announcement broadcast starts, the traffic
announcement broadcast is received as top
priority regardless of the function mode so you 
can listen to it. Traffic programme (TP)
automatic tuning is also available.
*  This  function  can  only  be  used  when  “
TP
” 
appears in the display. When “
TP
” appears, this 
means that the “Radio Data System” broadcast 
station being received has traffic announcement 
programmes.
Setting the TA standby mode
If you press the 
[TA]
 button, “
TA
” lights in the 
display and the unit is set into the TA standby 
mode until a traffic announcement is broadcast. 
When a traffic announcement broadcast starts, 
“
TRAF INF
” appears in the display. If you press 
the 
[TA]
 button while a traffic announcement 
broadcast  is  being  received,  the  traffic 
announcement broadcast reception is cancelled 
and the unit goes into the TA standby mode.
Cancelling the TA standby mode
As  “
TA
”  lights  in  the  display,  press  the 
[TA] 
button. The “
TA
” in the display goes off and the 
TA standby mode is cancelled.
PTY (Programme Type)
This  function  enables  you  to  listen  to  a 
broadcast of the selected programme type even 
if the unit is on a function mode other than radio.
*   Some  countries  do  not  yet  have  PTY 
broadcast.
*   In the TA standby mode, a TP station has 
priority over a PTY broadcast station.
Selecting PTY
Press  [
MENU  / 
 
]  button,  then  rotate  the 
[
VOLUME
] knob to select PTY type, press the 
[
VOLUME
] knob, the unit begin searching. 
DAB Operations
This function is available when DAB302E 
(sold separately) is connected.
Select tuner as playing source
Press 
[SRC /   ]
 button once or more to 
enter 
DAB
 mode.
Selecting the radio band
Press the 
[BAND /   ]
 button on the panel 
or on the remote control to select one radio 
band among D1, D2 and D3.
Selecting the ensemble
•   Manual selecting
   During manual selecting, the ensemble 
will be changed in steps.
   Press the 
[ 
 ] or [ 
 ]
 button on 
the panel to tune in a higher / lower 
ensemble.
•   Auto selecting
   Press and hold the 
[ 
 ] or [ 
 ] 
button to seek a higher / lower ensemble.
   To stop searching, repeat the operation 
above or press other buttons having radio 
functions.
Note:
When a ensamble service is received, 
searching stops and the service in current 
ensemble is played.
Turning the service
• 
Manual turning
   During manual turning, the ensemble will 
be changed in steps.
   Press the 
[ 
 ] or [ 
 ]
 button on the 
panel to tune in a higher / lower service.
•   Auto turning
   Press and hold the 
[ 
 ] or [ 
 ] 
button to seek a higher / lower service.
   To stop searching, repeat the operation 
above or press other buttons having radio 
functions.
Note:
When a service is received, searching stops 
and the service is played.
Manual store
When one expected service has been 
detected, press and hold button [ 
1
-
6
 ] to store 
it in the memory.
Preset scan
Preset  scan  receives  the services stored 
in preset memory in order. This function is 
useful when searching for a desired service 
in memory.
1. Press the [
PS/AS
] button.
2.  When a desired service is tuned in, press 
the [
PS/AS
] button again to continue 
receiving that service.
Recall the stored stations
Press one numeric button among 1 to 6  on 
the panel to select the corresponding stored 
service.
REG (Regional programme) 
TA (Traffic Announcement)
PTY (Programme Type)
These functions is same as Radio Data 
system. Refer to page10.