Manualsbrain.com
  1. Manuels
  2. Marques
  3. Clarion
  4. CZ703E
  5. Manuel D’Utilisation

Clarion CZ703E Manuel D’Utilisation

Télécharger
Page de 20
English
9
CZ703E
Audio Setup
    SLOP: -6 / -12DB
  - REAR SPK: PHASE NOR/PHASE REV
• SP GAIN
  HIGH: -20-----0DB
  MID:  -20-----0DB
  REAR: -20-----0DB
3. When speaker system is “3WAY”.
•  TIME ALIGNMENT
  HIGH L/R: 0----501.4cm
  MID L/R: 0----501.4cm
  SW L/R: 0----501.4cm
•  3way crossover
  - HIGH HPF
     CUT:   25HZ / 31.5HZ / 40HZ / 50HZ / 63HZ 
/ 80HZ / 100HZ / 125HZ / 160HZ / 200HZ / 
250HZ / 315HZ / 400HZ / 500HZ / 630HZ / 
800HZ / 1K / 1.25K / 1.6K / 2K / 2.5K / 3.15K 
/ 4K / 5K / 6.3K / 8K / 10.0K / 12.5K / 16K / 
20K / THROUGH
    SLOP: -6 / -12DB
  - HIGH SPK: PHASE NOR/PHASE REV
  - MID LPF
     CUT:   630HZ / 800HZ / 1K / 1.25K / 1.6K 
/ 2K / 2.5K / 3.15K / 4K / 5K / 6.3K / 8K / 
10.0K / THROUGH
    SLOP: -6 / -12DB
  - MID HPF
     CUT:   25HZ / 31.5HZ / 40HZ / 50HZ / 63HZ 
/ 80HZ / 100HZ / 125HZ / 160HZ / 200HZ / 
250HZ / 315HZ / 400HZ / 500HZ / 630HZ / 
800HZ / 1K / 1.25K / 1.6K / 2K / 2.5K / 3.15K 
/ 4K / 5K / 6.3K / 8K / 10.0K / THROUGH
    SLOP: -6 / -12DB
  - MID SPK: PHASE NOR/PHASE REV
  - SW LPH
     CUT: 25HZ / 31.5HZ / 40HZ / 50HZ / 63HZ 
/ 80HZ / 100HZ / 125HZ / 160HZ / 200HZ / 
250HZ / 315HZ / 400HZ / 500HZ / 630HZ / 
800HZ / 1K / 1.25K / 1.6K / 2K / 2.5K / 3.15K 
/ 4K / 5K / 6.3K / 8K / 10.0K / THROUGH
    SLOP: -6 / -12DB
  - SW HPF
     CUT:  THROUGH  /  16HZ  /  20HZ  /  25HZ 
/  31.5HZ  /  40HZ  /  50HZ  /  63HZ  /  80HZ  / 
100HZ/ 125HZ / 160HZ / 200HZ /250HZ
    SLOP: -6 / -12DB
  - SW SPK: PHASE NOR/PHASE REV
•  SP GAIN
  HIGH: -20-----0DB
  MID:  -20-----0DB
  S-WOOFER: -20-----0DB
STORE/RECALL  (NORMAL,  2WAY  and 
3WAY mode)
Rotate the [
VOLUME
] knob to choose “
STORE 
/  RECALL
”.  Press  the  [
VOLUME
]  knob  to 
confirm.
• 
STORE
   Rotate  the  [
VOLUME
]  knob  to  select  a 
position among “
MEMORY 1
, 
2 and 3
”. Then 
press and hold the [
VOLUME
] knob to store.
• 
RECALL
   Rotate  the  [
VOLUME
]  knob  to  select  a 
position among “
MEMORY 1
,
 2 and 3
”. Then 
press the [
VOLUME
] knob to recall.
Adjusting Sound Mode
Short-press  the  [    ]  button  to  enter  sound 
effect setting mode. First press shows current 
EQ. Rotate the [
VOLUME
] knob to change the 
BEAT EQ in this order:
OFF -> B-BOOST -> IMPACT -> EXCITE -> 
CUSTOM
Rotate  the 
[VOLUME]
  knob  to  choose  the 
CUSTOM, and press the 
[VOLUME]
 knob, then 
press
 
[
] or [
]
 
button to select it
 
including: 
BAND 1 G -> BAND 1 F -> BAND 1 Q -> BAND 
2 G -> BAND 2 F -> BAND 2 Q -> BAND 3 G -> 
BAND 3 F -> BAND 3 Q -> BAND 4 G -> BAND 
4 F -> BAND 4 Q -> BAND 5 G -> BAND 5 F -> 
BAND 5 Q, rotate the 
[VOLUME]
 knob to select 
a value.
BAND 1/2/3/4/5 G: (-12) - (+12)
BAND 1/2/3/4/5 F: 20HZ - 20.0K, THROUGH
BAND 1/2/3/4/5 Q: 1, 3, 5, 7, 20
Press  the 
[ 
  ]
  button,  then  press  [
] 
or [
] button to select USER preset including: 
BALANCE -> FADER(NORMAL, 2 WAY mode) 
-> SUBW VOL(Subwoofer Volume)(NORMAL, 
3 WAY mode), rotate the [
VOLUME
] knob to 
select a value.
BALANCE:  LEFT  1-12->CENTER->RIGHT 
1-12
FADER:
 
LEFT 1-12->CENTER->RIGHT 1-12
SUBW VOL: (-6) - (+6)
Note:
The  setting  items  below  are  not  stored  in 
memory.  After 
RESET
  or  the  back-up  line 
is  disconnected,  redo  these  settings.  We 
recommend  you  to  take  a  note  to  keep  the 
records.
Select tuner as playing source
Press 
[SRC /   ]
 button once or more to 
enter 
RADIO
 mode.
  
Selecting the radio band
Press the [
BAND / 
 ] button on the panel 
to select one radio band among FM1, FM2, 
FM3, MW and LW.
Manual tuning
During manual tuning, the frequency will be 
changed in steps.
Press the
 [ 
 ] or [ 
 ]
 button on the 
panel to tune in a higher / lower station.
Press the 
[ 
 ] or [ 
 ]
 button on the 
remote control to select preset stations.
Auto tuning
Press and hold the
 [ 
 ] or [ 
 ]
 button  
to seek a higher / lower station.
To stop searching, repeat the operation 
above or press other buttons having radio 
functions.
Note:
When a station is received, searching stops 
and the station is played.
Preset scan
Preset  scan  receives  the  stations  stored 
in preset memory in order. This function is 
useful when searching for a desired station 
in memory.
1.  Press the 
[PS/AS]
 button.
2.   When a desired station is tuned in, press 
the 
[PS/AS]
  button  again  to  continue 
receiving that station.
Note:
 
Be careful not to press and hold the 
[PS/AS] 
button for 1 second or longer, otherwise the 
auto store function will begin and the unit 
starts storing stations.
Radio Operations
Auto store
Only stations with sufficient signal strength will 
be detected and stored in the memory.
Press and hold the 
[PS/AS]
 button (1 sec.) to 
start automatic station search.
To stop auto store, press other buttons having 
radio functions.
Notes:
1. After auto store, the previous stored 
stations will be overwritten.
2.  The unit has 5 bands, such as FM1, FM2, 
FM3, MW and LW. FM3, MW and LW can 
store by AS function. Each bands can store 
6 stations, CZ703E can store 30 stations in 
total.
Manual store
When one expected radio station has been 
detected, press and hold number button 1-6 to 
store it in the memory.
Recall the stored stations
Press one numeric button among 1 to 6  on 
the panel to select the corresponding stored 
station.
Local seeking
When LOCAL seeking is ON, only those 
radio 
stations with strong radio signal could 
be received.
To select LOCAL function, press and hold the 
[ DISP ]
 button on the front panel, then press 
[ 
 ]
 button repeatedly until 
LO or DX 
displays on the screen, and rotate the 
[VOLUME] 
knob to select Local or Distant 
mode.
Note:
The  number  of  radio  stations  that  can  be 
received will decrease after the local seeking 
mode is ON.