Fujifilm FinePix S9400W 16408199 Manuel D’Utilisation

Codes de produits
16408199
Page de 143
109
Tr
o
u
b
le
sh
o
o
ti
n
g
Troubleshooting
Power and Battery
Problem
Problem
Possible cause
Possible cause
Solution
Solution
Page
Page
Power 
supply
The camera does 
not turn on.
The batteries are exhausted.
Insert fresh or fully-charged spare batteries.
9
The batteries are not in the correct orienta-
tion.
Re-insert the batteries in the correct orienta-
tion.
9
The battery-chamber cover is not latched.
Latch the battery-chamber cover.
10
The AC power adapter and DC coupler are 
not connected properly.
Make sure that the AC power adapter and DC 
coupler are properly connected.
The camera has been left for an extended 
period with no batteries inserted and the 
AC power adapter/DC coupler unplugged.
After inserting the batteries or connecting the 
AC power adapter/DC coupler, wait a few mo-
ments before turning the camera on.
The batteries run 
down quickly.
The batteries are cold.
Warm the batteries by placing them in a pocket 
or other warm place and re-insert them in the 
camera immediately before taking a picture.
v
There is dirt on the battery terminals.
Clean the terminals with a soft, dry cloth.
ON  is  selected  for  MONITOR SUNLIGHT 
MODE
.
Select OFF to reduce the drain on the battery.
6
The camera is in 
M mode.
Select another shooting mode. 
22
The batteries are new, have been left unused 
for  an  extended  period,  or  have  been  re-
charged without first being fully discharged 
(rechargeable Ni-MH batteries only).
Discharge Ni-MH batteries using the 
P
 DISCHARGE 
option and recharge them in a battery charger (sold 
separately).  If the batteries do not hold a charge af-
ter repeated discharging and recharging, they have 
reached the end of their service life and must be 
replaced.
104
CONTINUOUS is selected for F AF MODE. Select a different focusing option.
82
The camera turns 
off suddenly.
The batteries are exhausted.
Insert fresh or fully-charged spare batteries.
9
The AC power adapter or DC coupler has 
been disconnected.
Make sure that the AC power adapter and DC 
coupler are properly connected.
Troubleshooting