Futaba Hendheld RC 2.4 GHz No. of channels: 14 1-F8075 Fiche De Données

Codes de produits

1-F8075

158

<Functions of Model Menu (Helicopter Functions)>

● Select the function name

and return to the Model

menu by touching the

R T N b u t t o n . 　 O r t h e

H O M E / E X I T b u t t o n i s

pushed.

<SensorTouch™>

RETURN

GYRO mixing

This function used to adjust gyro sensitivity.

The sensitivity and operation mode (Normal mode/

AVCS mode) can be set for each condition.

The gyro sensitivity can be switched with each

condition or the switch. (5 sensitivities)

*Compatible with 3 axis gyro(CGY750).

● Select [GYRO] at the Model menu and access the

setup screen shown below by touching the RTN

button.

Scrolling

● Moving cursor

● Selecting mode

● Adjusting value

● To next page

Note: When using the [Gyro2]/[Gyro3] function,

assign [Gyro2]/[Gyro3] to any channel on the

function screen.

Always set to [--] both (Control) and (Trim) for

the [Gyro] function at the Function menu in

the Linkage menu.

(Currently selected condition name)

●Mode selection:
[AVCS]/[NORM]

●Gyro type selection:
[GY]/[NORM]

●Setup screen selection

●ON: (initial setting)

●Fine tuning VR settings

●Gyro sensitivity adjustment

●Condition/Switch selection

●The edit conditions can be

changed by touching the

S1 button.

*When the rate switching setting of

all the gyros is “Switch”, the edit

conditions are not displayed.

●The edit rate can be changed by operating

the edit rate button.

*When the rate switching setting of all the gyros is

“COND”, the edit rate button is not displayed.

●When the GYRO function button is selected,

each GYRO detailed setting screen

appears.