Moxa Technologies MOXA VPort 2310 Video Server 2310 Manuel D’Utilisation

 

Query status of digital inputs 

/setup/getdi.cgi 
Video Server will return status of four digital inputs in one line. 

Drive digital outputs 

/setup/setdo.cgi?do=<state> 
Where state is H, L. H means NC connected with COMMON and L means NO connected with 
COMMON. 
For example, http://192.168.0.201/setup/setdo.cgi?do=h will command the Video Server, with IP 
address of 192.168.0.201, to set digital output to connect to NC with COMMON. 

Moving motorized camera in PTZ direction 

<Direction>:   

up, left, right, down, home 

<Vision>: 

 

wide, tele, near, far, auto 

<Command>:   

1, 2, 3, 4, 5 

/cgi-bin/camctrl.cgi?Move=<direction>&zoom=<vision>&cust=<command> 
 
Param Value  Description 
move up 

  Tilt 

up 

 down 

Tilt 

down 

 left 

Pan 

left 

 right 

Pan 

right 

 

home 

Return to home position 

zoom wide  Zoom 

in 

 tele 

Zoom 

out 

focus near  Focus 

near 

 far 

Focus 

far 

 auto 

Automatic 

focus 

panspeed -5 

to 

5   

tiltspeed -5 

to 

5   

 

Recalling camera position 

/cgi-bin/recall.cgi?recall=<position> 
<position>: 

the text string of a location that is preset in system configuration. 

Refer to Camera preset configuration URL for preset function. 

Transparent Remote Serial Driver 

Video Server provides highly customized control support for third-party serial interface devices 
(other than PTZ cameras). This means that in addition to setting up a custom camera with PAN/ 
TILT/ ZOOM/ FOCUS commands, users may utilize this mode and introduce a customized 
homepage to transmit arbitrary user-defined commands from user-side to Video Server. The 
third-party device connected to the serial port of Video Server will receive the same command sent 
by the originator. The user only needs to attach the command in ASCII format after the special 
URL. The Video Server will parse the commands and translate into binary code to send out.