Maxon Telecom MODMAX MM-6280IND Manuel D’Utilisation
Extended AT Commands Manual
Page 31 of 70
2009-06-25
8 . S M S c o m m a n d s
8.1.1.
General Configuration Commands
8.1.1.1.
Select Message Service +CSMS
Set command selects messaging service <service>. It returns the types of messages supported by
the ME: <mt> for mobile terminated messages, <mo> for mobile originated messages and <bm> for
broadcast type messages. If chosen service is not supported by the ME (but is supported by the
TA), final result code +CMS ERROR: <err> shall be returned. See chapter Message Service Failure
Result Code for a list of <err> values.
Also read command returns supported message types along the current service setting.
Test command returns a list of all services supported by the TA.
Table 1. +CSMS action command syntax
the ME: <mt> for mobile terminated messages, <mo> for mobile originated messages and <bm> for
broadcast type messages. If chosen service is not supported by the ME (but is supported by the
TA), final result code +CMS ERROR: <err> shall be returned. See chapter Message Service Failure
Result Code for a list of <err> values.
Also read command returns supported message types along the current service setting.
Test command returns a list of all services supported by the TA.
Table 1. +CSMS action command syntax
Command
Possible response(s)
+CSMS=<servi
ce>
ce>
+CSMS: <mt>,<mo>,<bm>
+CMS ERROR: <err>
+CMS ERROR: <err>
+CSMS? +CSMS:
<service>,<mt>,<mo>,<bm>
+CSMS=?
+CSMS: (list of supported <service>s)
<service>
0 : 3GPP TS 23.040 and 3GPP TS 23.041
1 :
0 : 3GPP TS 23.040 and 3GPP TS 23.041
1 :
<mt>
0 : type not support
1 : type support
0 : type not support
1 : type support
<mo>
0 : type not support
1 : type support
0 : type not support
1 : type support
Value
<bm>
0 : type not support
1 : type support
0 : type not support
1 : type support
8.1.1.2.
Preferred Message Storage +CPMS
Set command selects memory storages <mem1>, <mem2> and <mem3> to be used for reading,
writing, etc. If chosen storage is not appropriate for the ME (but is supported by the TA), final
result code +CMS ERROR: <err> shall be returned. See chapter Message Service Failure Result
Code for a list of possible <err> values.
Test command returns lists of memory storages supported by the TA.
writing, etc. If chosen storage is not appropriate for the ME (but is supported by the TA), final
result code +CMS ERROR: <err> shall be returned. See chapter Message Service Failure Result
Code for a list of possible <err> values.
Test command returns lists of memory storages supported by the TA.