Whirlpool 1328891 Manuel D’Utilisation

1. Press ON/OFF to turn off the air conditioner.

2. Unplug the air conditioner or disconnect power.

3. Move the air conditioner to a drain location or outside.

NOTE: To avoid spilling water from the bucket, move the air 
conditioner slowly and keep it level.

4. Remove the secondary drain plug and drain water 

completely.

5. Remove the primary drain hose from the drain hose clip.

6. Remove the drain hose plug from the end of the primary drain 

hose and drain water completely.

NOTE: If the air conditioner will be stored after use, see 
“Storing After Use.”

7. Reinstall the secondary drain plug.

8. Reinstall the drain hose plug to the primary drain hose.

9. Reattach the primary drain hose to the drain hose clip.

10. Reposition the air conditioner.

11. Plug in the air conditioner or reconnect power.

12. Press ON/OFF to start the air conditioner.

1. Press ON/OFF to turn off the air conditioner.

2. Open the filter panel door on the back of the air conditioner 

and remove.

3. Remove the air filter from the filter panel door. 

4. Use a vacuum cleaner to clean the filter. If the filter is very 

dirty, wash the filter in warm water with a mild detergent.

NOTE: Do not wash the filter in the dishwasher or use any 
chemical cleaners.

5. Air dry the filter completely before replacing to ensure 

maximum efficiency.

6. Reattach the air filter to the filter panel door.

7. Reinstall the filter panel door.

8. Press ON/OFF to start the air conditioner.

1. Press ON/OFF to turn off the air conditioner.

2. Unplug the air conditioner or disconnect power.

3. Remove the air filter and clean separately. See “Cleaning the 

Air Filter.”

4. Wipe the outside of the air conditioner with a soft, damp 

cloth.

5. Plug in the air conditioner or reconnect power.

6. Press ON/OFF to start the air conditioner.

1. Drain the water completely. See “Draining the Air 

Conditioner.”

2. Run the air conditioner set to Fan Only for approximately 

12 hours to dry the air conditioner.

3. Unplug the air conditioner. 

4. Remove the flexible exhaust hose and store with the air 

conditioner in a clean, dry area. See “Installation 
Instructions.”

5. Remove the window kit and store with the air conditioner in a 

clean, dry area. See “Installation Instructions.”

6. Remove the filter and clean. See “Cleaning the Air Filter.”

7. Clean the outside of the air conditioner. See “Cleaning the 

Outside.”

8. Reinstall the filter.

9. Remove the batteries and store the remote control with the 

air conditioner in a clean, dry area.

A

B

C

D

A

B