Marantz AV Pre Tuner AV7005 Manuel D’Utilisation

85

ENGLISH

DEUTSCH

FRANÇAIS

ITALIANO

ESPAÑOL

NEDERLANDS

SVENSKA

GUI
(Continued)

Wall Paper : Set wallpaper to display in the background when playback 
is stopped, etc.
• Picture : Set the background to a picture (Marantz logo).
• Black : Set the background to black.
Format : Set the video signal format to be output for the TV you are using.
• NTSC : Select NTSC output.
• PAL : Select PAL output.

“Format” can also be set by the 
following procedure. However, the menu 
screen is not displayed.
1. Press and hold the main unit’s 

 

and 

 for at least 3 seconds.

“Video Format” appears on the 
display.

2. Press 

o

 

p

 and set the video signal 

format.

3. Press the main unit’s 

, 

 

or 

 to complete the setting.

When a format other than the video format of the connected TV is set, the 
picture will not be displayed properly.
Text  :  Display  the  details  of  operation  when  switching  surround  mode, 
input mode, etc. 
• ON : Turn display on.
• OFF : Turn display off.
Master Volume : Display the master volume during adjustment.
• Bottom : Display at the bottom.
• Top : Display at the top.
• OFF : Turn display off.

 When the master volume display is hard to see when superimposed 

on movie subtitles, set to “Top”. 

NET/USB : Set the NET/USB screen display time when the input source 
is “NET/USB”.
• Always : Show display continuously.
• 30sec : Show display for 30 seconds after operation.
• 10sec : Show display for 10 seconds after operation.
• OFF : Turn display off.

Move the cursor 
(Up/Down/Left/Right)

Confirm the setting

Return to previous menu

GUI
(Continued)

TUNER  :  Set  the  tuner  screen  display  time  when  the  input  source  is 
“SIRIUS” or “HD Radio”.
• Always : Show display continuously.
• 30sec : Show display for 30 seconds after operation.
• 10sec : Show display for 10 seconds after operation.
• OFF : Turn display off.
iPod : Set the iPod screen display time when the input source is “NET/
USB”.
• Always : Show display continuously.
• 30sec : Show display for 30 seconds after operation.
• 10sec : Show display for 10 seconds after operation.
• OFF : Turn display off.

Component 2 Output
Set whether to use the 
component 2 output 
terminal as MAIN ZONE or 
ZONE2.

MAIN ZONE : Use the component 2 output terminal as a monitor output 
for MAIN ZONE.
ZONE2 : Use the component 2 output terminal as a monitor output for 
ZONE2.

Zone Rename
Change the display title of 
each zone to one you prefer. 

• Up to 10 characters can be input.
• For character input, see page 65.

Trigger Out
Select the condition for 
activating Trigger Out 1/2 for 
the input source, surround 
mode, etc.
See “DC OUT (TRIGGER 
OUT) jacks” (vpage 54) for 
more information on trigger 
out.

Trigger Out 1 / Trigger Out 2

n

Trigger out is activated through linkage to the power of the zone set 
to “ON”.

n

Activate trigger out when the input source set to “ON” is selected.

 Active for the zone set to “ON” with “When Setting for Zone”.

n

Activate trigger out when the HDMI monitor set to “ON” is selected.

 Active when the “MAIN ZONE” set to “ON” with “When Setting 

for Zone” is selected, and when the input source set to “ON” with 
“When Setting for Input Source” is selected.

• ON : Activate trigger on this mode.
• – – – : Do not activate trigger on this mode.
Default : The “Trigger Out” settings are returned to the default settings.
• Yes : Reset to the defaults.
• No : Do not reset to the defaults.

1.AV7005U_ENG.indd   85

2010/08/23   18:33:15