PolyScience VSCR-200AC1B Manuel D’Utilisation

13

PolyScience Vacuum Sealing Systems

2. Place the open end of the bag across the Vacuum 

Compartment Seal Gasket, making certain that the open end 

is within the Vacuum Compartment.

Note: A positive seal will look “clear” upon inspection. 

If the seal is spotty, incomplete, wrinkled, white or 

milky, cut the seal and restart the vacuuming and 

sealing process.

!

WARNING: Be sure to store vacuum packaged items 

properly after sealing. All perishable foods must be 

refrigerated or frozen to prevent spoilage. Vacuum 

packaging is not a substitute for canning.

!

3.

4. 

5. 

 

 

 

 

 

 

Close the Vacuum Compartment Lid.

Adjust the Seal Time setting as required (see Setting the Seal 

Time, page 12).

Press 

Auto. The segments on the Digital Display will light 

in a clockwise direction until the vacuum step has been 

completed. The selected Seal Time will then appear on 

the Digital Display and the sealing cycle will begin. The 

display will count down from the selected Seal Time. When 

the display reaches 0, the Vacuum Compartment Lid will 

open automatically and the unit will beep for two seconds 

indicating that the vacuuming and sealing process has been 

completed.

Remove the bag and check for proper vacuum and seal.

6.