Whirlpool CGT8000XQ Manuel De Montage

NOTE: Dryer only. Washer door is not reversible.

1.  Place a towel or soft cloth on top of dryer or work space to 

avoid scratching of the surface.

2.  Remove 3 of the 4 screws that hold the door hinge on the 

front panel of the dryer. Partially loosen the remaining screw 

with keyhole opening and lift the door off the screw.

3.  Lay the door assembly on a previously prepared flat surface 

with the inside (inner door assembly) facing up, and remove 

6 phillips-head screws to release outer door assembly from 

inner door assembly. 

 

NOTE: It is important that you remove only 6 indicated screws.

4.  Lift the inner door assembly off outer door assembly.

5.  Rotate outer door 180°. 

1.  Use a small flat-blade screwdriver to remove 2 plug strips 

from the inner door. Slide the head of the screwdriver under 

the plugs, without scratching inner door surface, and lift up 

strip.

2.  Remove the 4 screws that attach to inner door hinge.