Summit FFBF181SSIM Manuel D'Instructions

253479

•   Place the appliance in a dry and well-aired room. Ambient 

temperature should never be lower than 41°F.

•  Place the appliance fl at and fi rmly on a solid base. The 

appliance is fi tted with adjustable feet on the front side, used 
to level the appliance. The rear side of the appliance is fi tted 
with wheels facilitating the positioning of the appliance at the 
preselected place.

•  Allow at least 2 inches of space above the appliance to ensure 

suffi cient cooling of the condenser.

•  Avoid exposing the appliance to direct sunlight or heat 

sources. If this is not possible, install an insulation plate 
between the appliance and the adjacent heat source.

•  The bottom front corners of the appliance are fi tted with 

handles to facilitate moving. The appliance may stand 
independently or adjacent to a wall, cabinet or other appiance. 
Be sure to leave enough space for the opening of the door, to 
avoid damage to the appliance or personal injury. Also leave 
ample space for removing shelves (see installation diagram).

•  Two spacers attached to the appliance must be fi tted onto the 

upper edge of the condenser, thus preventing the appliance 
from being installed too close to the wall.

 

6