Elica EAR134S2 Manuel De Montage

 

 

Disconnect power.
Locate terminal box inside of the hood insert. 

 

 

 

 

 

Use UL listed wire connectors and connect black wires  

 

(B) together.
Use UL listed wire connectors and connect white wires  

 

(A) together. 

 
 

 

Electrical Shock Hazard 
Electrically ground blower. 
Connect ground wire to green and yellow ground wire in 
terminal box. 
Failure to do so can result in death or electrical shock. 

Connect green (or bare) ground wire from home power  

 

supply to the green/yellow ground wire (D) in terminal  

 

box using UL listed wire connectors.
Install terminal box cover.
Check that all light bulbs are secure in their sockets.

Reconnect power. 

1.
2.

3.

4.

5.

6.
7.

8.

A

B

C

D

E

G

F

A.White wires
B. Black wires
C. UL listed wire connectors
D. Green, bare or yellow/green wires
E.Home power supply
F. UL listed or CSA approved ¹⁄2” (1.3 cm) strain relief
G. Ground Wire tab

B

A

A. Wiring Box Connector
B. Hood Insert Connector

 

Install grease filters. See the “Cleaning” section.
Check operation of the Hood Insert blower and lights.  

 

See the “Hood Insert Use” section. 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

If the hood insert does not operate, check to see 

 

whether a circuit breaker has tripped or a hous 

 

hold fuse has blown.
Disconnect power supply and check that the  

 

wiring is correct. 

NOTE: To get the most efficient use from your new hood 
insert, read the “Hood Insert Use” section.

1.
2.

3.

4.

A. Halogen lights
B. Halogen light switch
C. Blower control switche 
D. Grease filter handle
E. Grease filter
F.  Filter Spacer (Only for EAR628SS model)

A

A

B C

A

A