Manualsbrain.com
  1. Manuels
  2. Marques
  3. GE
  4. PD900
  5. Manuel D’Utilisation

GE PD900 Manuel D’Utilisation

Télécharger
Page de 16
3
(Continued on following page)
Door removal is not a requirement for 
installation of the product, but is an added 
convenience. To remove the door:
Open the oven door as far as it will go.
Push both hinge  
locks down toward  
the door frame,  
to the unlocked  
position. This may  
require a flat blade  
screwdriver.
NOTE: The oven door is very heavy.  
Be sure you have a firm grip before lifting the
oven door off the hinges. Use caution once the
door is removed. Do not lay the door on its
handle. This could cause dents or scratches.
Installation Instructions
Pre-Installation Checklist
Hinge Lock
(Unlocked 
Position)
Hinge
Slot
Hinge Arm
Place hands on both sides of  
the door, and close the oven  
door to the removal position.  
This is half way between the  
broil stop and fully closed.
Lift door up and  
out until the  
hinge arms  
clear the slots.
DO NOT LIFT THE DOOR  
BY THE HANDLE!
Inspect Installation Location
Protect the kitchen floor! Flatten and place 
a piece of the shipping carton in front of the 
installation location to protect the flooring.
Move Range Indoors In Front of
Cabinet Opening 
(Do not use hand trucks when moving
the unpackaged range. Cooktop glass
may be broken.)
To obtain Kits: 
a. Visit GE Web Site (See page 1)
b. Call GE Answer Center (See page 1)
c. Contact Dealer
Do not remove the protective channel
from the sides of the glass cooktop until
later in installation.  
(If supplied) 
Inspect cutout dimensions and location  
of electrical junction box to be sure it fits
within the layout location. See page 4.
Refer to alternate construction section for 
the following non-standard installations.
a.  Counter opening extends to the wall: 
Maintop Filler Kit (JXS66XX), or
Backguard Kit (JXS36XX or JXS39SS).
 
WARNING: If you do not use these 
kits, the anti-tip bracket must fit under
an attachment to the wall that can 
withstand a force of 200lbs. in the 
upward direction. See Section D1.
b.  Island Installation:
 
To provide an optimum installation, the 
top surface of the countertop must be 
level and flat (lie on the same plane)
around the 3 sides that are adjacent to 
range cooktop. Proper adjustments to
make the top flat should be made or
gaps between the countertop and range 
cooktop may occur. Forcing the cooktop
to fit may cause excessive gaps, or could
break the glass cooktop and void the
warranty.
Remove packing materials. Remove labels
on door, plastic on trims and  
panel, and all tape around the range.
Hinge 
Clears Slot