Smeg SC361X Manuel D’Utilisation

Page de 26
 
 
Instructions for the installer
 
 
32
 
2.  INSTALLATION 
 
2.1 Electrical connection 
 
Check that the mains voltage and power cable ratings are as per the 
information provided on the label attached to the oven door frame.  
This label must never be removed
 
 
It is obligatory for the electrical system to be earthed according to the 
methods required by safety rules. 
 
 
If a plug and socket connection is being used make sure that the plug 
and socket are compatible. Avoid use of adapters and shunts as these 
could cause overheating and risk of burns. 
 
 
If a fixed connection is being used fit cable line with an omnipolar circuit 
breaker with a contact opening gap equal to or greater than 3 mm in an 
easily accessible position in proximity to the oven. 
 
 
 
 
 
For operation on 220-240V 
: use an 
H05RR-F / H05RN-F type three-core cable 
(3 x 1.5 mm
2
).
 
 
The cable end to be connected to the 
appliance must be provided with an ground 
wire (yellow-green) at least 20 mm longer.