Avocent EMS1000P Manuel D’Utilisation

Emerge EMS Installer/User Guide

 

Chapter 2: Installation

0.19" (5mm

)

0.37" (9.5mm)

Before you begin connecting to the source PC system and display units, it is advisable to mount 

the Emerge EMS units in place. There are a number of mounting possibilities for the transmitter 

and receiver units:
•  On a horizontal surface using the supplied self adhesive feet,
•  Mounted on a screw using the rear slot,
•  Within the optional rack mount chassis,
•  On inclined surfaces using self adhesive Velcro

©

 strips (not supplied).

Using the supplied self adhesive feet
Apply the supplied self-adhesive rubber feet 

to the underside corners of the Emerge EMS 

units. 

Using the rear mounting slot
The slot at the rear of each unit allows 

it to be hung upon a fixed screw that 

protrudes from the mounting surface.

IMPORTANT: The internal circuit board 

is accessible through the mounting 

slot. Ensure that the mounting screw 

protrudes no further than 1⁄2” (12.5mm) 

into the unit casing - serious electrical 

damage will be caused if the screw 

makes contact with the internal circuitry.

Figure 2.1: Applying the self adhesive rubber feet

Figure 2.2: The rear mounting slot