Avocent EMS1000P Manuel D’Utilisation
6
Emerge EMS Installer/User Guide
Chapter 2: Installation
7
Using the optional rack mount chassis
1. Place the optional rack plate onto the front of the transmitter or receiver unit and secure it with
1. Place the optional rack plate onto the front of the transmitter or receiver unit and secure it with
countersunk screws.
2. Orient the unit on its side so that its labeled face is the correct way up and the securing plate is
facing away from the rack.
3. Slide the unit into the required rack position.
4. The rack mount chassis has a series of holes in its floor that are spaced
4. The rack mount chassis has a series of holes in its floor that are spaced
to accommodate the screws on the unit’s lower edge. Ensure that
the screws correctly locate into the holes of the chosen slot.
The rack securing plate on the unit should now be
flush with the front of the rack mount chassis.
5. Use a (pan-head) screw in the top hole of
the rack securing plate to fasten the
unit to the rack.
Figure 2.3: Placing an Emerge EMS unit within the optional rack mount chassis