Avocent EMS1000P Manuel D’Utilisation

Emerge EMS Installer/User Guide

 

Chapter 3: Operations

To Display the Supplied Skew Test Pattern 
1.  Insert the supplied Avocent CD-ROM into the CD player 

of the computer. 

2.  Within Windows, use the My Computer option (usually 

available as a desktop icon or within the Start menu) to 

view the contents of the CD-ROM. Double-click the Skew 

entry to display the standard test pattern. If necessary, 

maximize the application window so that the image fills 

the screen. 

 

The screen will show a series of fine red, green and 

blue crosses which should all be in line, vertically and 

horizontally- skew affects the horizontal placement of the 

colors. 

To Zero the Skew Adjustment Dials
When supplied, the two skew dials are set in their neutral positions. 

i.e. no delay to either of its colors. However, if the unit has been 

previously used and adjusted then you may need to relocate the zero 

point. There are no setting markers around the two skew dials and the 

dial itself does not have a pointer.  
1.  Insert a small screwdriver into the skew dial and twist it all the 

way counterclockwise. Note the position of the dial when it 

reaches its end point.

2.  Rotate the screwdriver fully clockwise and again note the 

endpoint position of the dial.

3.  Now rotate the screw driver counterclockwise until the dial 

reaches the position that lies midway between the two end points. 

This is the neutral position. 

4.  Repeat this procedure for the other skew dial, if necessary.

Figure 3.6: The supplied skew 

test pattern showing green slightly 

retarded relative to the red and blue

(no compensation)

Figure 3.7: A skew 

compensation dial showing 

its middle neutral position 

and its two maximum 

positions