Cateye EC-C400 Manuale Utente

• Attach the earlobe sensor, and press the 

 training selection

button to start the Quick start training program.

• A buzzer sounds, and start the training.

Reference:

In the Quick start training program, no conditions are
specified. The upper pulse limit is fixed to 160 bpm.

Selecting training program

Changing the display

• "START WARM-UP" appears in the display. Start pedaling

slowly.

• The pedal resistance automatically changes so that it becomes 1.0

kg·m within three minutes of the start of warm-up.

Reference:

When the 

 button is pressed during warm-up, or

when the pedal resistance is changed to 1.0 kg·m or
more using the 

 or 

 button, the warm-up is skip-

ped.

• The pedal resistance (torque) is indicated in the lower part of the

graph on the display. One dot along the horizontal axis represents
three seconds while two dots along the vertical axis represent 0.1
kg·m.

• The blinking numeric value in the upper part of the graph indicates

the pulse at that point. One dot along the vertical axis represents 2
bpm.

• Every three seconds, a row of dots blinks. Thus, the training status

can be monitored.

• When the warm-up period finishes, change the pedal resistance as

desired using the 

 and 

 buttons and then proceed with the train-

ing program.

• Pressing the 

 button switches the numeric value displayed.

Reference:

• If the pedal cadence is not detected for five seconds,

the pause display appears. At this time, the speci-
fied training duration is interrupted and "PAUSE"
blinks in the display. When pedaling starts again,
the specified training duration recommences.

• A maximum of 10-minutes' worth of data can be dis

played. After 10 minutes, 5-minutes' worth of exe-
rcise graph scrolls to the left.