Agilent Technologies 8935 series e6380a Manuale Utente
152
Chapter 5
C:\Spk\Ref\RefGuideRevE\CdmascrnE2.fm
CDMA Measurements - Screens and Control Fields
Control Fields for CDMA Measurements
Analyzer (CDMA analyzer)
The
Analyzer
field controls three functions:
•
Arm Meas
arms the CDMA analyzer. The CDMA analyzer needs to
be armed only when
Single
(see below) is selected.
•
Single/Cont
selects between “single” measurements and
“continuous” measurements.
— When
Single
is chosen, you must arm each measurement by
selecting the
Arm Meas
field (see above).
— When
Cont
(continuous) is chosen, measurements are
automatically armed.
The default selection is
Cont
.
•
Disarm
disarms the CDMA analyzer during single operation. To stop
continuous measurements, select
Single
. Selecting
Disarm
does not
prevent the analyzer from being re-armed during continuous
measurements
measurements
Screens on which this field is present
CDMA ANALYZER
Analyzer (code domain analyzer)
This field is used to arm or disarm measurements when making a
single measurement (does not affect continuous measurements).
Selecting
single measurement (does not affect continuous measurements).
Selecting
Disarm
stops the analyzer during a single measurement.
See
for more information.
Screens on which this field is present
COD DOM (Code Domain Analyzer): main controls menu
Anl Dir
This field is used to select the type of signal (forward or reverse link) to
analyze.
analyze.
•
Fwd
sets the analyzer to look for base station transmitter data
(forward link).
•
Rev
sets the analyzer to look for mobile transmitter data (reverse
link).
Default selection:
Fwd
Screens on which this field is present
CDMA ANALYZER