Agilent Technologies 8935 series e6380a Manuale Utente
Chapter 7
249
Configuration - Screens and Control Fields
Control Fields on the Configuration Screens
Serial Port
This field selects the serial port. The SERIAL 9 port must be used for
serial printing. SERIAL 11 is reserved for use with special software
that enables remote operation through a PC.
serial printing. SERIAL 11 is reserved for use with special software
that enables remote operation through a PC.
For more information about the serial ports see
.
Screen(s) Where Field is Present
I/O CONFIGURE
MODEM CONFIGURE
MODEM CONFIGURE
Status
This field indicates the status of the modem connection.
• Connected
• Idle
• Waiting
• Dialing
• Authenticating
• Disconnecting
Screen(s) Where Field is Present
MODEM CONFIGURE
Stop Length
This field specifies the number of stop bits (1 or 2) used for serial
communications when using the serial port.
communications when using the serial port.
This setting is maintained after the instrument is turned off.
Operating Considerations
When in remote mode (
Remote Mode
field is set to
On
), this field is
inaccessible.
Screen(s) Where Field is Present
I/O CONFIGURE