Agilent Technologies E6380-90073 Manuale Utente
Chapter 1
263
GPIB Command Dictionary
MEASure subsystem
:DEC:DTMF:HIGH:FREQuency:ABSolute <meas cmnd>
:DEC:DTMF:HIGH:FREQuency:ABSolute?
:DEC:DTMF:HIGH:FREQuency:ABSolute?
These command set/query the frequency of the high tone in the DTMF
pair. The MEAS:DEC:DTMF:HIGH:FREQ:DISP ‘Freq’ command must
be used to display the absolute frequency of the high tone.
pair. The MEAS:DEC:DTMF:HIGH:FREQ:DISP ‘Freq’ command must
be used to display the absolute frequency of the high tone.
Syntax
MEAS:DEC:DTMF:HIGH:FREQ:ABS
MEAS:DEC:DTMF:HIGH:FREQ:ABS? !returns up to 20 real values
Screen/field equivalent
MEAS:DEC:DTMF:HIGH:FREQ:ABS? reads the
Hi Tone
column on
the SIGNALING DECODER screen. The
Mode
field must be set to
DTMF
and the upper subfield of the
Hi Tone
field must be set to
Freq
.
:DEC:DTMF:HIGH:FREQuency:ERRor <meas cmnd>
:DEC:DTMF:HIGH:FREQuency:ERRor?
:DEC:DTMF:HIGH:FREQuency:ERRor?
These command set/query the frequency error of the high tone in the
DTMF pair. The MEAS:DEC:DTMF:HIGH:FREQ:DISP ‘Frq Err’
command must be used to display the frequency error of the high tone.
DTMF pair. The MEAS:DEC:DTMF:HIGH:FREQ:DISP ‘Frq Err’
command must be used to display the frequency error of the high tone.
Syntax
MEAS:DEC:DTMF:HIGH:FREQ:ERR
MEAS:DEC:DTMF:HIGH:FREQ:ERR? !returns up to 20 real values
Screen/field equivalent
MEAS:DEC:DTMF:HIGH:FREQ:ERR? reads the
Hi Tone
column on
the SIGNALING DECODER screen. The
Mode
field must be set to
DTMF
and the upper subfield of the
Hi Tone
field must be set to
Frq Err
.