Agilent Technologies E6380-90073 Manuale Utente
![Agilent Technologies](https://files.manualsbrain.com/attachments/f20ae6efbee7636e6d0d1a481fd9e3847e3caeb5/common/fit/150/50/991587f279eee8cef3aa0a068e5c2f53d86b00e1bf17fbcbf9a87aa49d96/brand_logo.png)
Chapter 1
261
GPIB Command Dictionary
MEASure subsystem
:DEC:AMPS|TACS:DATA?
This command queries the decoded data for the voice channel.
Syntax
MEAS:DEC:AMPS:DATA?
Example
MEAS:DEC:AMPS:DATA? !returns a quoted string reporting the
decoded data obtained from the voice channel measured by the
signaling unit.
For example, the Signaling Decoder reads the voice channel
and returns the data as depicted below:
09A15386CDA286604938B128063FD5F8
030078ECDBED872DABF0D308A1718FDB
685461FC0C2130410982E2DAE08C0300
54D0D9B450C08231AFD909BED8C840C0
The information received is the same as that displayed in the
Data (hex)
field of the SIGNALING DECODER screen.
Screen/field equivalent
MEAS:DEC:AMPS:DATA? reads the
Data (hex)
measurement field on
the SIGNALING DECODER screen when the
Mode
field is set to
AMPS-TACS
, and the
Channel
field is set to
Voice
.
:DEC:DTMF:LOW:FREQuency:ABSolute <meas cmnd>
:DEC:DTMF:LOW:FREQuency:ABSolute?
:DEC:DTMF:LOW:FREQuency:ABSolute?
These command set/query the frequency of the low tone in the DTMF
pair. The MEAS:DEC:DTMF:LOW:FREQ:DISP ‘Freq’ command must
be used to display the absolute frequency of the low tone.
pair. The MEAS:DEC:DTMF:LOW:FREQ:DISP ‘Freq’ command must
be used to display the absolute frequency of the low tone.
Syntax
MEAS:DEC:DTMF:LOW:FREQ:ABS
MEAS:DEC:DTMF:LOW:FREQ:ABS? !returns up to 20 real values
Screen/field equivalent
MEAS:DEC:DTMF:LOW:FREQ:ABS? reads the
Lo Tone
column on the
SIGNALING DECODER screen. The
Mode
field must be set to
DTMF
and
the upper subfield of the
Lo Tone
field must be set to
Freq
.