Agilent Technologies E6380-90073 Manuale Utente
Chapter 1
75
GPIB Command Dictionary
AFG2|ENCoder subsystem
:AMPS|TACS:BUSY <string>
:AMPS|TACS:BUSY?
:AMPS|TACS:BUSY?
These commands set/query the busy/idle status information included in
the signaling sequence.
the signaling sequence.
• ‘Idle’ sets the busy/idle bits of the forward control channel
information to indicate an idle state.
• ‘Busy’ sets the busy/idle bits of the forward control channel
information to indicate an busy state.
• ‘WS Delay’ (word sync delay) prevents a busy/idle change until the
word sync information has been received and a defined number of
delay bits has been counted. The delay is set with the
AFG2:AMPS:BUSY:DEL command.
delay bits has been counted. The delay is set with the
AFG2:AMPS:BUSY:DEL command.
• ‘1stBitDly’ (first bit delay) causes the busy/idle bit to be set after a
bit has been received and a defined number of delay bits has been
counted. The delay is set with the AFG2:AMPS:BUSY:DEL
command.
counted. The delay is set with the AFG2:AMPS:BUSY:DEL
command.
This command requires that the AFG2:AMPS:CHAN command
specifies ‘Cntl’.
specifies ‘Cntl’.
Syntax
AFG2:AMPS:BUSY ‘Idle’
‘Busy’
‘WS Delay
‘1stBitDly’
AFG2:AMPS:BUSY?
Screen/field equivalent
AFG2:AMPS:BUSY controls the
Busy/Idle
field on the SIGNALING
ENCODER screen when the
Mode
field is set to
AMPS-TACS
and the
Channel
field is set to
Cntl
.