Agilent Technologies E6380-90073 Manuale Utente

GPIB Command Dictionary

These commands set/query the number of bits that are counted before a 
busy/idle bit changes from the idle state to the busy state. This function 
is used in conjunction with the WS Delay and 1stBitDly settings of the 
AFG2:AMPS|TACS:BUSY command. This command also requires that 
the AFG2:AMPS:CHAN command is specifies ‘Cntl’. 

This command utilizes only the :INCR command of the “Integer 
Number Setting Syntax” on page  206.

AFG2:AMPS:BUSY:DEL <real number>

AFG2:AMPS:BUSY:DEL controls the 

 field on the 

SIGNALING ENCODER screen when the 

 field is set to 

.

These commands set/query the channel type. ‘Cntl’ selects the forward 
control channel (FOCC). ‘Voice’ selects the forward voice channel (FVC).

AFG2:AMPS:CHAN ‘Cntl’

‘Voice’

AFG2:AMPS:CHAN?

AFG2:AMPS:CHAN controls the 

 field on the SIGNALING 

ENCODER screen when the 

 field is set to 

.