Samsung SDC-241 SERIES Manuale Utente

COLOR CCD CAMERA

COLOR CCD CAMERA

◆

After removing the protecting  cap, attach the lens into the
camera by turning clockwise.

◆

1. After removing the protecting

cap, loosen the Back focus lock
screw with screwdriver.

2. Turn the Focal length adjusting

knob to counterclockwise until
locking.

3. Attach the lens into the camera

by turning clockwise.

4. Turn the Focal length adjusting

knob to clockwise slowly at the
best point.

5. Tighten the Back focus lock screw

with screwdriver.

•A heavy lens may disturb the balance with the camera and possibly results in damage.

Don't use more than 450g lens.

•It is recommended to set the lens ALC mode to Av mode (Average).

Pk mode can be occurred hunting.

•Use the lens under the specification as shown. Otherwise

the lens can damage the camera or abnormal fixing may be resulted in.

C-mount lens : 10 mm or less 
CS-mount lens : 5 mm or less 

•Do not turn the Focal length adjusting knob

too much to clockwise after clicking when
use CS-mount lens.

Before mounting a lens, please check whether it is a C-mount or
CS-mount lens.
The back focus has set for CS-mount lens at the factory.
If the mount is changed to the C-mount lens, it may need to
be re-adjusted.

Installing C/CS-Mount lens