Samsung SDC-241 SERIES Manuale Utente

COLOR CCD CAMERA

COLOR CCD CAMERA

Connecting to Monitor

Connect the VIDEO Out jack to the monitor VIDEO In jack.

Connecting to Power

Each model has different power specification, please check the name of
the model and power specification before connecting to power source.
Please refer to the sticker identifying the model, which is attached on
the product, for power specification.

• As a connecting method varies according to instruments, refer to

the manual supplied with the instrument.

• Connect the cable after power is turned off.

• Set the 75

Ω

/Hi-Z selection switch as shown below if you have

intermediate device.

Monitor

AC adaptor

AC outlet

220V

100V

AC24V GND

AC adaptor

220V

100V

230V

230V

~

50Hz

CCD Camera

Intermediate

End monitor

•The wire is polarized. Be sure to

connect the wire with white line on
its covering to‘ - ’terminal and
connect the other one to

‘ + ’teminal.

•Use DC 12V power source

for SDC-311(241) ND/PD.

•Use AC 24V~50Hz power source

for SDC-311(241)PA.
(The wire is non-polarized.)

•The wire is non - polarized.
•Use AC 24V 60Hz power

source for SDC-311(241)NA.

※Connect the wire by pushing the

button

•Use AC 230V~50Hz power source for

SDC-311(241)PH.

•Be sure to connect power after all the installation is done.

•Note that AC adaptor is not supplied with camera.
•Since the wire of DC power type is polarized, be careful when

Connecting it.

CCD Camera