Avalon Stoves 21 DV Fireplace Manuale Utente

© Travis Industries

100-01143

Insert the sheathed cable from the power source through 

this cable clamp.  Once the wires are attached, tighten 

the clamp to secure the  cable.

Replace the 

cover removed 

in step "a".

Attach the common (white), ground (exposed or green) 

wires, and hot (black) wires from the power source to the 

electrical connector (attached to the fireplace).

Standard 
Screwdriver

Remove the cover 

from the fireplace 

junction box.

1/4" Nutdriver

WARNING: Make sure power is 

off from the power lead before 

conducting any wiring.

Electrical 

Connector

Remove the two screws securing the 
electrical inlet (save these screws).

Remove the cover plate on the bottom of the 
fireplace (save these nuts).

Position the electrical inlet assembly over the 
hole in the baseplate of the fireplace and 
secure using the screws removed in step “b”.

Position the cover plate over the 
electrical inlet hole on the right side 
of the fireplace and secure using the 
nuts removed in step “a”.