Heat Controller MMH36TA-1 Manuale Utente
Installation Manual 21
Connecting the Cable between Indoor Unit and Outdoor Unit
Connect the cable to the indoor unit
CAUTION: Provide a circuit breaker between power source and the unit
as shown below.
as shown below.
Air
Conditioner
Circuit Breaker
Use a circuit
breaker or time
delay fuse.
Use a circuit
breaker or time
delay fuse.
Main power source
Model
Power source Fuse or breaker
Capacity
1Ø, 230 / 208V
20 A
1Ø, 230 / 208V
25 A
1Ø, 230 / 208V
40 A
18K BTU/h
24K BTU/h
24K BTU/h
36K BTU/h
1. Connect the wires to the terminals on the
control board individually according to the
outdoor unit connection.
outdoor unit connection.
• Ensure that the color of the wires of outdoor
unit and the terminal No. are the same as
those of indoor unit respectively.
those of indoor unit respectively.
2. Attach the Grille onto the cabinet.
• Grasp the lower left and right side of the
Grille and engage four tabs on the top inside
edge of the chassis.
edge of the chassis.
• Press the Grille toward the chassis until it
goes back into place.
Connecting cable