Jensen CD1213 Manuale Utente

CD1213

8

Press the 3 RPT button (21) during disc play to 

continuously repeat the selected track. “S--

RPT” will appear in the display. Press 3 RPT 

again to stop repeating. “S--RPT” will disappear 

from the display, and regular play will resume. 

The repeat function will also be canceled when 

activating the scan or shuffle functions.

Press the 4 RDM button (22) during disc play to 

play all tracks on a CD in random, shuffled 

order. “S--SHF” will appear in the display. Press 
4 RDM

 again to stop random play. “S-SHF” will 

disappear from the display and regular play will 

resume. The shuffle function will also be 

canceled when activating the scan or repeat 

functions.

Press the eject button (12) to stop CD play and 

eject the disc. The unit will change to tuner or 

AUX operation, depending on which mode was 

in operation prior to disc play. If the disc is not 

removed from the unit within 15 seconds, the 

disc will be reloaded to prevent accidental 

damage. Disc play can be resumed by pressing 
SRC

 (2) to choose the CD player function.

If a problem should develop while operating the 

CD player, “Disc Error” or “Error 1” may appear 

on the display panel. If “Disc Error” appears, try 

ejecting and reloading the disc into the player. 

While the disc is out of the unit, make sure it is 

clean and undamaged, and then load it 

correctly. “Error 1” can indicate a number of 

problems with the unit, including a mechanical 

error or an error in the microprocessor control 

of the player. Pressing the reset button (26) 

may help, but will erase the time and preset 

memory. If the suggested measures do not 

solve the problem, contact an approved 

warranty station near you for further assistance.