Lexmark 3EN Manuale Utente
![Lexmark](https://files.manualsbrain.com/attachments/878cae5fca737841ce37f41a7ee73881a8b54f60/common/fit/150/50/823435a5b9c868f91a4b7f8b99ddfd9b9c699edf1f6ff104003e82a92d7f/brand_logo.png)
Cannot scan to a computer over a network
If the "Before you troubleshoot" checklist does not solve the problem, then try one or more of the following:
M
AKE
SURE
THE
PRINTER
AND
THE
DESTINATION
COMPUTER
ARE
CONNECTED
TO
THE
SAME
NETWORK
M
AKE
SURE
THE
PRINTER
SOFTWARE
IS
INSTALLED
ON
THE
DESTINATION
COMPUTER
M
AKE
SURE
“E
NABLE
NETWORK
SCAN
TO
COMPUTER
”
IS
SELECTED
IN
THE
G
ENERAL
TAB
OF
THE
S
CAN
C
ENTER
(M
ACINTOSH
ONLY
)
Notes:
•
This is available only in Mac OS X version 10.6.
•
If you have several applications open, then make sure that the Scan Center is the active application. Otherwise,
the correct menu bar does not appear.
the correct menu bar does not appear.
From the menu bar, navigate to:
Scan Center > Preferences > General tab
Memory card troubleshooting
•
•
•
•
Memory card troubleshooting checklist
Before you troubleshoot, use the following checklist to solve most memory card problems:
•
Make sure that the memory card you are using can be used in the printer.
•
Make sure the memory card is not damaged.
•
Make sure memory card contains supported file types.
Nothing happens when a memory card is inserted
If the "Memory card troubleshooting checklist" does not solve the problem, then try one or more of the following:
R
EINSERT
THE
MEMORY
CARD
The memory card may have been inserted too slowly. Remove and then reinsert the memory card quickly.
C
HECK
THE
USB
CONNECTION
1
Check the USB cable for any obvious damage. If the cable is damaged, then use a new one.
2
Firmly plug the square end of the USB cable into the back of the printer.
Troubleshooting
107