Lexmark 3EN Manuale Utente
S
ELECT
THE
CORRECT
COMPUTER
NAME
FROM
THE
LIST
ON
THE
PRINTER
M
AKE
SURE
YOUR
WIRELESS
NETWORK
IS
CONNECTED
AND
ACTIVE
If your wireless connection is down, then use a USB cable to connect your printer to your computer.
Wireless troubleshooting
•
•
•
•
•
•
•
•
•
•
•
•
•
Wireless troubleshooting checklist
Before beginning to troubleshoot the wireless printer, verify the following:
•
The printer, the computer, and the wireless access point are all plugged in and turned on.
•
The wireless network is working properly.
Try accessing other computers on your wireless network.
If your network has Internet access, try connecting to the Internet over a wireless connection.
•
Your SSID is correct.
Print a network setup page to verify the SSID the printer is using.
If you are not sure if your SSID is correct, then run the wireless setup again.
•
Your WEP key or WPA passphrase is correct (if your network is secure).
Log into the wireless access point (wireless router) and check the security settings.
A security key is like a password. All devices on the same wireless network using WEP, WPA, or WPA2 share the
same security key.
same security key.
If you are not sure if your security information is correct, run the wireless setup again.
•
The printer and the computer are within the range of the wireless network.
For most networks, the printer and the computer should be within 100 feet (30 meters) of the wireless access point
(wireless router).
(wireless router).
•
The Wi-Fi indicator light is lit and is solid green.
•
The printer driver is installed on the computer from which you are performing a task.
Troubleshooting
109