Lexmark 4039-1XX Manuale Utente

Service Manual

1. With the armature latched on the cam step check for 0.60 mm 

± 0.07 mm between the foam pad and the magnet pole piece. If 
adjustment is required, continue: 

2. Keep the armature latched and loosen the magnet mounting 

screw [A].

Note:  The flat side of the D-roll is down when the feed is latched.

3. Insert feeler gage.

4. Rotate the magnet against the feeler gage.

5. Tighten the mounting screw.

6. The gage should pass between the foam pad and the magnet 

pole piece with moderate resistance.