APC AP9607 Manuale Utente

13

If your UPS has exactly one SmartSlot accessory slot, use 
this accessory slot for the SmartSlot device with the lowest 
priority. Install SmartSlot devices with higher priority in an 
Expansion Chassis (AP9600) or Triple Chassis (AP9604—

If you are using a Symmetra PowerArray, see “Installation 
in the Symmetra PowerArray” on page 14.

To install SmartSlot devices in the APC Triple Chassis 
(AP9604), note that the slots are numbered on the rear 
panel. The following figure shows the rear panel of the 
Triple Chassis with the PowerNet 

SNMP

 Adapter installed 

in slot #3, Call-UPSII in slot #2, and the Interface Expander 
in slot #1. (In this scenario, Measure-

UPS

II could be 

installed in the accessory slot of the 

UPS

.)