Lexmark 4097-00X Manuale Utente

Repair Information

1. Open the access cover.

2. Push the mounting tabs toward the center of the machine.

3. Remove the access cover.

1. Remove the front cover.

2. Depress the button clips and remove the buttons.

3. Lift and remove the lenses.

1. Remove the front cover.

2. Remove the printhead carrier without disconnecting the system 

board cables.

3. Remove the carrier belt.

4. Depress the latch on the idler pulley, slide it to the left and 

remove.

1. Remove the front cover.

2. Remove the six screws that secure the carrier frame to the base 

assembly.

3. Remove the paper guide.

4. Tilt the lower part of the carrier frame up and remove the carrier 

frame.

Note:  Be sure the parallel cable clips are not trapped inside the 
cover.