Lexmark 4097-00X Manuale Utente

Service Manual

1. Remove the front cover.

2. Remove the carrier frame.

3. Remove the exit roller.

4. Remove the small feed roller assemblies.

5. Remove the EOF flag.

6. Depress the latches located on the rear of the mid frame and 

remove the mid frame and star roller assembly.

Note:  If any glue is present on the star roller assembly during 
removal, replace the star roller assembly. Do not reinstall the old star 
roller assembly.

1. Remove the front cover.

2. Remove the carrier frame.

3. Disconnect the operator panel cable from the system board. 

Note the routing of the cable.

4. Remove the operator panel screw from the carrier frame.

5. Remove the operator panel.

1. Remove the front cover.

2. Remove the carrier frame.

3. Disconnect the paper feed motor from the system board.

4. Remove the two screws mounting the paper feed motor to the 

gear plate assembly and remove the motor. Note the routing of 
all cables.

Slide the paper guide to the center of the printer, lift up and remove.