Agilent Technologies FS2101 Manuale Utente

This chapter provides additional reference information including 
the characteristics and signal connections for the PCI Active 
Analysis Probe module.  

The following operating characteristics are not specifications, but 
are typical operating characteristics for the PCI Active Analysis 
Probe module. 

32/64 bit PCI Local bus accepting the short card length and 
universal connector pinout. All PCI local bus ground pins of the 
universal board pinout are connected to the ground plane of the 
PCI Active Analysis Probe module. 

The PCI Active Analysis Probe does not implement JTAG 
Boundary SCAN.  Pins TDI and TBO (pins 4a and 4b) are 
connected together so the scan chain is not broken. 

The PCI signals PRSNT1# and PRSNT2# are routed to the PCI 
Active Analysis Probe extender card connector. 

The PCI Local Bus Specification Revision 2.1. 

The PCI Active Analysis Probe contains several active 
components that buffer the PCI signals before they are acquired 
by the logic analyzer.  The Analysis Probe takes no power from 
the PCI bus but is powered by the logic analyzer. 

1660A/C,  1661A/C,  1662A/C,  16550A,  16554A,  16555A,  
16556A,  1670A, 1671A,  1672A 

32 bit PCI  multiplexed - 4 cable headers 

32 bit PCI demultiplexed - 6 cable headers 

32 bit address demultiplexed, 64 bit data - 9 headers 

64 bit PCI  multiplexed  - 7 cable headers 

      64 bit PCI  demultiplexed  - 11 cable headers