Cleveland Range 24-CDP-10 Dépliant
Cleveland
™
Project ________________________________
Item __________________________________
Quantity _______________________________
FCSI Section ____________________________
Approval _______________________________
Date __________________________________
1333 East 179 St.,
Cleveland, Ohio, U.S.A. 44110
Tel: 1-216-481-4900
Fax: 1-216-481-3782
Web Site: www.ClevelandRange.com
Email: Steam@ClevelandRange.com
STEAMCRAFT
®
GENERATOR STYLE
HIGH SPEED CONVECTION STEAMERS
MODEL:
c 24-CDP-10
Cleveland Standard Features
n
Cooking Capacity for up to ten 12˝ x 20˝ x 2
1
⁄
2
˝ deep
Cafeteria Pans.
n
Durable 14 Gauge Stainless Steel Construction:
For compartment door, cavity and front.
For compartment door, cavity and front.
n
One 60 Minute Electro-Mechanical Timer and Switch
for manual operation. Audible signal for cooking time
completion.
for manual operation. Audible signal for cooking time
completion.
n
Separate Switch for Power “on/off.”
n
Exclusive Steam Cooking Distribution System: Exclusive
Brass Steam Jets produce a high velocity convection steam
without fans. Coved Corner design in cooking compartment
distributes heat evenly, and is easy to keep clean. Creased
top & bottom enhance drainage. Cold Water Condenser for
each compartment maintains a dry steam. Fully insulated
cooking compartment for thermal efficiency. Removable
Stainless Steel Slide Racks.
Brass Steam Jets produce a high velocity convection steam
without fans. Coved Corner design in cooking compartment
distributes heat evenly, and is easy to keep clean. Creased
top & bottom enhance drainage. Cold Water Condenser for
each compartment maintains a dry steam. Fully insulated
cooking compartment for thermal efficiency. Removable
Stainless Steel Slide Racks.
n
Exclusive “Cool to the Touch” Compartment Door
Design: Free floating inner door with reversible door gasket
provides an air tight seal. Stainless Steel Slam/Latch Door
Latch mechanism for reliability.
Design: Free floating inner door with reversible door gasket
provides an air tight seal. Stainless Steel Slam/Latch Door
Latch mechanism for reliability.
n
Condensate Drip Trough: Provided under lower
compartment door to collect condensate.
compartment door to collect condensate.
n
Left Hand Door Hinging: Compartment Doors hinged left,
control on the right.
control on the right.
n
Moisture Separator for incoming steam.
n
Pressure reducing Valve or 20-50 psi steam supply
pressure, based on a
pressure, based on a
3
⁄
4
˝ line size.
n
Single Cold water Connection.
n
NSF Certified 6˝ Stainless Steel Legs with adjustable
flanged feet for a one inch level adjustment.
flanged feet for a one inch level adjustment.
n
Standard voltage for controls: 115 volts, 60 Hz. single
phase.
phase.
o Clean non-toxic, uncontaminated steam is required for all
“Direct Steam” steamers.
Options & Accessories
p Second Pressure Reducing Valve for 50-120 psi steam
pressure. (PRV)
Shall be CLEVELAND,
SteamCraft
Ultra 10
, two compartments,
Direct Steam Floor Model Steamer, Model 24-CDP-10, single, large
capacity Pressureless Convection Steamer. Choice of Compartment
Controls, Manual By Pass Operation Mode, Compensating
Thermostat, Exclusive Cold Water Condenser design, Type 430
Stainless Steel exterior and cooking compartments.
p Right Hand Door Hinging, Controls on the Right (DHR)
p Electronic Timer with Compensating Load Feature (ETC)
p ON/OFF Steam Switch only for compartment controls (MC)
p 10˝ Stainless Steel Legs (LF10)
p Compartment Door Steam Shut Off Switch (SCS)
p Cafeteria Pans in depths of 1˝, 2
1
⁄
2
˝, 4˝
and 6˝
p Water Filters
p Correctional Packages
p Correctional Packages
Short Form Specifications
4
SteamCraft
®
Ultra 10 D
TWO COMPARTMENT FLOOR MODEL DESIGN
PRESSURELESS CONVECTION STEAMER
DIRECT STEAM, 24˝ WIDE DESIGN
PRESSURELESS CONVECTION STEAMER
DIRECT STEAM, 24˝ WIDE DESIGN
SECT.
IV
PAGE
21
0707